How to move the Allis-Chalmers bulldozer

[Andy-42]

Hi all

I installed the Allis-Chalmers bulldozer... but I have no clue how to move this thing around

I'm able to lift or lower the blade with F5/F6 and to use the winch cable, but that's all. I have chosen the automatic transmission,
the parking brake is off... but it won't go forward a single meter

How do you do that...?

So long,
Andy

 

[Razmott]

F1 forward + up arrow (not obligatory but better to go faster)
F2 backward + down arrow
Turn with F1/F2 and left/right.
Just that ! Have fun !

 

[Andy-42]

F1 forward + up arrow (not obligatory but better to go faster)
F2 backward + down arrow
Turn with F1/F2 and left/right.
Just that ! Have fun !

Unfortunately, this is not working. With up arrow, the engine revs up, but it looks like there is no transmission working, although the automatic transmission lever is set to "D".
All other vehicles work without any problems.

 

[Razmott]

You have to hold down F1 and there is a slight delay between when you press it and the vehicle moving forward. Also, remember that you have to press F1 and the up arrow first.