J35 V6 Soundpack 3.5

[Forge]

Forge submitted a new resource:

J35 V6 Soundpack - Sounds from the Honda 3.5 J-Series Engine!

These sounds are from a 2nd Generation Saturn VUE with a 3.5 Honda J35 V6, Pushing 248 HP And 242 lb⋅ft of torque. These Engines were chain driven, SOHC V6's, With an Aluminium block.
It was available with a 5 Speed Automatic Transmission (Honda H5).
I recommend using this with any vehicle with a V6, Such as the Gavril G2's, And the MV4,
Note: This Soundpack is only designed to go to 5000 RPM's. Anything higher will break the Rev Limiter sound.

Read more about this resource...

 

[JAYC33B01]

Hey, do you know how to change the car's rpm?

 

[Forge]

Hey, do you know how to change the car's rpm?

...Kinda
For my example, I used the Gavril G2S
Open up its truck file. Look at the max rpm thats listed.
Now open RoR, And rev to max RPM. It should be higher than whats listed in the truck file.
Count how many rpms higher it is, This is important.
Now return to the truck file.
Delete the old max RPM.
For me, The max RPM is set to 3950, Because the real max rpm it revs to, Is 1050 RPM's higher.
The max RPM, If set to 5K, Will rev to somewhere around 6K.
If set to what I listed however, It will rev to 5K.
Im no expert with this, So... Try your best with this info.
Note: The Listed RPM to Max RPM is different for all vehicles.

 

[JAYC33B01]

...Kinda
For my example, I used the Gavril G2S
Open up its truck file. Look at the max rpm thats listed.
Now open RoR, And rev to max RPM. It should be higher than whats listed in the truck file.
Count how many rpms higher it is, This is important.
Now return to the truck file.
Delete the old max RPM.
For me, The max RPM is set to 3950, Because the real max rpm it revs to, Is 1050 RPM's higher.
The max RPM, If set to 5K, Will rev to somewhere around 6K.
If set to what I listed however, It will rev to 5K.
Im no expert with this, So... Try your best with this info.
Note: The Listed RPM to Max RPM is different for all vehicles.

Okay, Now have found another problem, When I install the Soundpack to the G2S, It doesn't work.

 

[Forge]

Okay, Now have found another problem, When I install the Soundpack to the G2S, It doesn't work.

Make sure you have put this in the Truck File.

 

[JAYC33B01]

Make sure you have put this in the Truck File.
View attachment 12598

Still the same... it's just the original engine and not the J35

 

[Forge]

Oh! Maybe try deleting the old sounds and its .soundscript.
Use the new sounds, And their soundscript.
If it still doesn't work, Try renaming the soundscript to the name of the original one.

 

[Forge]

Forge updated J35 V6 Soundpack with a new update entry:

First Update!

Included in this update for the 3.5 Pack, is a new Exhaust Sound, a New Horn, and better timing loops on the sounds!

Read the rest of this update entry...